Filter
Top Products
8
Various methods of connecting your TV
Method 1
Unplug the RF cable from the “ANT.IN” Jack on the rear panel of the TV.
Plug this cable into the “RF IN” jack on the rear panel of the Converter Box.
Connect the “RF OUT” jack on the Converter Box to the “RF IN” jack on the TV with another RF
cable.
Method 2 : Connecting to a TV equipped with audio/video in jacks
Use the audio/video cable (
Not supplied
) to connect the “Video Out” jack on the Converter Box to
the “Video In” jack on your TV.
Connect the “Audio Out jack on the Converter Box to the “Audio In” jack on the TV.
Match the color of the cable to the color of the jack.
■ The default RF Output channel is Ch 4. And you can change it to Ch 3. See “Output Channel” on
page 18.
CONNECTING TO A TV
Outside Antenna or Wall
Antenna Outlet
Rear Panel of Converter Box
Rear Panel of TV
Method 1
Method 2
DA1S-GN1DAA-AN¿ 2007.11.15 4:34 PM ˘ ` 8 mac001 1200DPI 100LPI