Filter
Top Products
ENGLISH
7
PREPARATION
TV/AV Mode Selection
Whenever the AV button is pressed, the on-screen display will
be changed as shown:
TV AV1(or AV1/S-video) Component AV2(or
AV2/RGB) TV
AV Input Jack (AV1)
This jack has video / audio inputs.
The jack is used to connect a Camcorder, VCR, Video game.
S-video Input Jack (AV1/S-video)
It has Y/C inputs.
This jack is used to connect an S-Video Camcorder, S-video VCR.
Component Input Jack (Component)
It has Y/Pb(Cb)/Pr(Cr) inputs and audio inputs.
It is used to connect a DVD player.
SCART Jack (AV2, AV2/RGB)
This jack has video / audio inputs and outputs, RGB inputs.
It is used to connect a STB, VCR.
In most cases, the TV set switches automatically to AV2 mode,
when the external equipment connected is in playback mode.
If not, then use the AV button to select AV2.
In AV mode, you can change the TV programme number with the
UP/DOWN button or the NUMBER button.
Headphone Jack
Insert the headphone plug(3.5 mm ) into this jack.
The sound from the speaker will be automatically cut off.
You can control the headphone sound with the
/
button.
6
PREPARATION
Connecting external equipment
DVD
Settop box
Settop box
Camcorder
Headphone
VCR
VCR
Video game
TV
AV1
AV2
AV1/S-video
Component
Note :
Note :
If you wish to use only the aerial (RF) connection, then you should
make use of PR 00 on the TV set for best performance to tune in
and record from a set top box or VCR.
When the TV SET is no signal, OSD(On Screen Display) appears on
the screen.
Note :
Note :
The AV input Jack and S-video input Jack are shared connections
with priority given to the S-video input Jack. When the S- video
Jack is connected, the TV set switches automatically to AV1/S-
video mode.
Do not connect both the AV Input Jack and S-video Input Jack .
AV2/RGB
DSL20D1T(PAL)·º¿ GB 03.10.23 1:48 PM ˘ ` 6 mac001 1200DPI 90LPI