Filter
Top Products
ENGLISH
1312
DAILY USE
Switching On and Off
Status
SWITCHING ON
1.
If the Indicator is not lit, then the TV set is powered off.
You must press the MAIN POWER switch on the TV set.
The set will switch to stand-by mode and then the Indicator
will illuminate in Red.
2.
Press the POWER button,
/
button or NUMBER button.
The TV set will be switched on and then the Indicator change
to Green.
SWITCHING OFF
1.
Press the POWER button to return the set to its stand-by
mode.
The Indicator will illuminate in Red.
2.
Press the MAIN POWER switch to turn the TV set off
completely.
Note :
Note :
If you don't use the set for extended periods of time, turn it off with
MAIN POWER switch.
The STATUS button is used to display the current status; TV/AV
mode, Programme number, Channel Name, Sound mode.
PR 12 - - - - -
NICAM Stereo
TV
DAILY USE
Programme Selection
The set has 100 programme numbers, PR00..PR99.
DIRECT SELECTION
The NUMBER buttons are used for direct programme selection.
To select a two-digit programme, press the second numbered
button within 2 seconds.
/
SELECTION
You can also select a programme by pressing step by step the
/
buttons.
Picture Control
BRIGHTNESS, CONTRAST, COLOUR,
SHARPNESS, TINT CONTROL
1.
Call up the Picture menu.
2.
Select and adjust the level of each function:
"Brightness", "Contrast", "Colour", "Sharpness".
"Tint" is displayed only when receiving a NTSC
signal. The adjusted levels are stored automatically
in Favourite mode.
SMART PICTURE SELECTION
When you press the PICTURE( )button repeatedly,
you can call up four pictures settings;
Normal Bright Dark Favourite Normal
Select Adjust Exit
Picture Brightness 50
Sound Contrast 50
Features Colour 30
Setup Sharpness 86
Tint 0
DSL20D1T(PAL)·º¿ GB 03.10.23 1:48 PM ˘ ` 12 mac001 1200DPI 90LPI