Filter
Top Products
23
Alignment Instructions
4-3. Vertical Size Adjustment
• Select “V.SIZE” item, adjust “V.SIZE” data value to proper vertical size as follows.
5) WHITE BALANCE ADJUSTMENT (S8)
• Receive a good local channel.
• Enter the service mode and select service adjustment S8.
• You can see the OSD as shown in below.
• Using volume up or volume down, adjust service adjustment data of RD/GD/BD and RB/GB/BB until a good
gray scale with normal whites is obtained. ALIGNMENT INSTRUCTIONS
• Press the DISPLAY button to memorize the data.
6) DIGITAL PRESET (D.P) ADJUSTMENTS (S9)
SUBBRIGHTNESS ADJUSTMENT
• Receive a good local channel.
• Enter the service mode and select service adjustment S9.
• You can see the OSD as shoown in below.