Filter
Top Products
10
Connecting an Antenna or Cable to Your TV
connect the
incoming cable to the IN terminal on the converter box. Connect another cable between the OUT terminal on the
converter box and the antenna terminal on the TV. You will need to keep your TV tuned to channel 3 or 4 and
change channels using the converter box.
follow these steps: Find the primary incoming coaxial cable. Plug this cable into a splitter
(available at your local electronics store). Connect one coaxial cable between one OUT terminal on the splitter and the
IN terminal on the converter box. Connect another coaxial cable between the other OUT terminal on the splitter and
the B-IN terminal on an A/B switch (available at your local electronics store.) Connect a third coaxial cable between
the OUT terminal on the converter box and the A-IN terminal on the A/B switch. Finally, connect a coaxial cable
between the OUT terminal on the A/B switch and the antenna terminal on the back of your TV.
When the A/B switch is in the A position, you need to change channels on the converter box (and your TV should
be tuned to channel 3 or 4); when the A/B switch is in the B position you can change channels on the TV.
You may want to connect a VCR, laser disc player, satellite receiver, or another type of equipment to your TV. We
recommend that you follow the instructions included with the piece of equipment you wish to connect.
If you plan on being away from your home for an extended period of time, or if a thunderstorm is approaching,
you should unplug your television, and you may wish to disconnect your TV from a rooftop or satellite antenna.
You do not need to disconnect your TV from a cable system.
IN OUT
Converter Box
OUT OUT
IN
OUT
IN IN
B
A