Filter
Top Products
8
CHAPTER
2
Connecting an Antenna or Cable to Your TV
Your TV will provide you with the best performance if you connect it to an external antenna or cable system.
Follow the directions below make this connection. Please note that you will normally only have to make one of the
connections shown below, not all of them.
All connections will be made to the antenna terminal on the back of your TV. The antenna terminal is a silver
metal post partially surrounded by two plastic tabs. For help in locating the antenna terminal, see
Your TV's Back
Panel on page 5.
simply press or screw the cable onto the antenna terminal on the
back of your TV.
you must use a 300-ohm/75-ohm
adapter(available at your local electronics store). Place the leads underneath the screws on the adapter, tighten the
screws, then press the adapter onto the antenna terminal on the back of the TV.