Daewoo DV6T534B DVD Player User Manual


 
21
VCR Operation
20
To Delete Channels Manually
After memorizing automatically channels, when the same broadcasting is memorized in more than two
channels, or you want to delete badly displayed channels, follow the procedures below.
You must set the viewing mode for your VCR, choosing either CABLE (cable system connection) or ANTENNA
(antenna connection).
1
1 Press [SETUP] button and select
ÒCHANNEL SETÓ. Select ÒAdd/Remove
ChannelsÓ.
2
2 Select the desired channel and delete it.
ADD/REMOVE CHANNELS
Channel 02
is now REMOVED.
To Memorize Channels Manually
When the desired broadcasting finished or you want to add unmemorized channels owing to poor signals to
the memory, follow the procedures below.
Press [SETUP] button and select
ÒCHANNEL SETÓ.
Select ÒAdd/Remove ChannelsÓ.
1
1
Select the desired channel and memorize it.
Press [NUMBER] button of remote control to
select the desired channel to memorize.
When [>] button is pressed, ÒREMOVEDÓ under
channel number converts into ÒADDEDÓ.
2
2
Check the memorized channel.
To check the memorized channel, press [CH+/Ð] button on remote control.
3
3
ADD/REMOVE CHANNELS
Channel 02
is now ADDED.
Memorizing TV Channels
Memorizing TV Channels
Press [SETUP] button.
Press [ ] button to move into CHANNEL
SET, and then select CHANNEL SET with
[ENTER] button.
Select ÒAUTO CHANNEL SEARCHÓ.
Press [ENTER] button in CHANNEL SET window
to select AUTO CHANNEL SEARCH.
Select ÒDetect AutomaticallyÓ.
Press [ENTER] button in AUTO CHANNEL SEARCH
window to detect the channel automatically.
Channel number changes successively from 01
to 125, while only broadcasting channels are
memorized automatically. When memory
process is completed, the lowest numberÕs one
of memorized channels is displayed.
Please, check the memorized channels.
To check the memorized channels, press [CH+/Ð] button on remote control.
1
1
2
2
3
3
To Memorize Automatically Channels
SETUP
CLOCK SET
TIMER RECORDINGS
CHANNEL SET
FUNCTIONS
LANGUAGE SELECT
AUTO CHANNEL SEARCH
What type of signal are you
using?
Cable TV
Antenna
Detect Automatically
AUTO CHANNEL SEARCH
Now scanning channel 11
CHANNEL SET
Auto Channel Search
Add/Remove Channels
Signal Type: CABLE
Cable Box Setup
Channel Change: CH3
CHANNEL SET
Auto Channel Search
Add/Remove Channels
Signal Type: CABLE
Cable Box Setup
Channel Change: CH3
Selecting cable or antenna viewing
To set the viewing mode:
Press [ENTER] to toggle the setting between CABLE and
ANTENNA in CHANNEL SET screen.
When the desired viewing mode is displayed, press
[SETUP] twice to exit.
CHANNEL SET
Auto Channel Search
Add/Remove Channels
Signal Type: CABLE
Cable Box Setup
Channel Change: CH3
To Set Cable Box
To Set Output Channel
Press [SETUP] button and select ÒCHANNEL
SETÓ . Select ÒChannel ChangeÓ.
By pressing [ENTER] button, set the exclusive channel
for video on the desired one of CH3 or CH4.
Press [SETUP] button and select
ÒCHANNEL SETÓ.
Select ÒCable Box SetupÓ.
1
1
Select ÒCable Box ChannelÓ.
Press the channel number which matches to the
output of the Cable Box to connect between
Cable Box and this unit.
2
2
CABLE BOX SETUP
On what channel do you
want to receive from
the cable box?
- -
CHANNEL SET
Auto Channel Search
Add/Remove Channels
Signal Type: CABLE
Cable Box Setup
Channel Change: CH3
CHANNEL SET
Auto Channel Search
Add/Remove Channels
Signal Type: CABLE
Cable Box Setup
Channel Change: CH3
Press [NUMBER] button of remote control to select the desired channel to delete.
When [<] button is pressed, ÒADDEDÓ under the channel number converts into
ÒREMOVEDÓ.
3
3 To check the deleted channel, press [CH+/Ð] button on remote control.