Filter
Top Products
VCR Operation
33
Tuning in New Stations
Tuning
■ The TV and player are switched on.
■ To see the picture from your player, press the station button on the TV reserved for player input or the AV (Audio /
Video) button.
■ "AV1/2" should not be selected with the AV button on the player.
To complete the set-up of your video recorder when
the auto set has not stored all of the channels or
when you wish to store a new channel.
Call the video’s "MAIN SETUP", choose "PR
PRESET".
1
Select "MANUAL SET".
2
Choose any unused location number "----" or "P-xx"
...
It's simplest to use the same location number on
both the TV and video.
... and confirm.
3
Set the station you want:
• the programme location number;
• the broadcast system you want (Aerial(CH) or
Cable(CC)),
• You can directly enter the real channel number with
the [0 to 9] buttons, or search by pressing [< / >],
• The fine tuning you can adjust,
• When the program is encoded (and you have a
decoder connected to socket EURO AV2), press the
[< or >] to select ON or OFF.
• Change or create the station name.
4
Once you see the station you want, store it.
Tune in further stations (from step 3 onwards) or exit
tuning mode.
5
PR PRESET
AUTO SET
MANUAL SET
PR ERASE
PR ALIGN
PR+/-:SELECT
OK:CONFIRM SETUP:END
MANUAL SET
PR+/-: UP/DOWN
</>: SELECT
OK:CONFIRM SETUP:END
MANUAL SET
PR01 BBC1 PR08 SKYS
PR02 BBC2 PR09 MTVE
PR03 ITV PR10 P-10
PR04 CHA4 PR11 P-11
PR05 SKY1 PR12 ----
PR06 SKYN PR13 ----
PR07 SKYM PR14 ----
PR+/-:SELECT
OK:CONFIRM SETUP:END
PR 04
RECEPTION AERIAL
AUTOSEARCH CH
_ _
FINE TUNING
DECODER ON
NAME
_ _ _ _
MANUAL SET
PR+/-: UP/DOWN
</>: SELECT
OK:CONFIRM SETUP:END
PR 03
RECEPTION AERIAL
AUTOSEARCH CH 03
FINE TUNING
DECODER ON
NAME
_ _ _ _
MANUAL SET
PR+/-: UP/DOWN
0/1: CHANGE/CREATE
OK:CONFIRM SETUP:END
PR 03
RECEPTION AERIAL
AUTOSEARCH CH
_ _
FINE TUNING
DECODER ON
NAME
_ _ _ _
If DECODER
mode does not appear
on the screen, it is not
available on your
video.
DV6T711P-AP(DESUK)1 02.7.24 11:16 AM ˘ ` 33 mac001 300DPI 120LPI