Filter
Top Products
72
Before doubting about troubles (VCR)
• “Power On” does not work.
• It does not work even in “Power
On”.
Checks
Symptom
■ Power
➤ Please check whether a power plug is inserted in an electric outlet.
➤ Please check whether a videotape is inserted in.
➤ Try to insert a plug again.
• A channel on video and a play
screen does not appear.
• Noise (screen noise) appears on
screen.
■ Screen and noise
➤ Please check your antenna’s connection.
➤ TV channel should be fixed on video channel.
➤ Please check your antenna’s signal whether it may be weak. In
case of its weakness, please use a frequency amplifier connected
with the device.
➤ Press “TV/VCR” and then let “VCR” is displayed on the display
panel.
➤ While in no use of VCR, was it turned on?
➤ While in recording a program, do you watch another channel?
➤ Select TV by pressing [TV/VCR] button on the remote control.
• A videotape is not inputted in.
• On inputting a videotape, the tape
is re-ejected.
• A videotape is not ejected.
■ Input and ejection
➤ Please check whether a power plug is inserted in an electric outlet.
➤ Please check whether a videotape is in.
➤ Please check whether a videotape is inserted in a right direction
(a side of transparent window should be on the upside)
➤ Have you inputted a videotape again just after the tape was
ejected? Please try it again after fully ejecting it.
➤ When a videotape forces to be ejected, the tape may not be
inputted. In the case, please pull out an outlet, and then push the
tape smoothly.
➤ That’s why a safe mode to protect a videotape is operated
automatically. Please pull out the tape and input it again.
➤ In case the product is used for a long time, a videotape may not be
ejected for a film inside may be stretched. In the case, please pull
out a power plug for about 10mins and then press “EJECT” button.
DV6T711P-AP(DESUK)2 02.7.22 3:45 PM ˘ ` 72 mac001 300DPI 120LPI