Filter
Top Products
Connections
15
How to connect
To make VCR tape to tape recordings
■ Before you start, unplug all the equipment from the mains supply.
First player
Second VCR
230V~,
50/60 Hz
1) Insert the tape you wish to record on into the first player and press [INPUT] until “AV1” appears on the front
display.
2) Insert the tape you wish to copy from into the second player. Press the [PLAY] button on the second player.
3) Press the [RECORD] button on the first player.
The player will start recording.
If your player has two scart sockets, you can use the other socket “AV2” to connect other equipment.
To use this function, see page 17.
How to connect your player to a camcorder
How to connect
■ Before you start, unplug all the equipment from the mains supply.
If you have connected your camcorder in this way, you can also connect a scart lead from “AV1” on the
back panel of the player to the television. To use this function, see page 17.
You can also connect the camcorder by using a phono cable if your player has front input sockets.
Check the front of your player for these connections, see page 17.
Camcorder
Aerial
230V~,
50/60 Hz
Television
Player
to camcorder
Scart Plug to TV
connect a scart lead
from player to second
VCR