Filter
Top Products
3
Thank you for choosing the Galaxy ™ system, designed for Distributing and daisy
chaing high-resolution video signals over long distances via CAT 5 cables. By
choosing Galaxy, you have assured that your installation is equipped for the ever-
increasing demands made in a modern computer-based information environment.
The Galaxy system allows the info-computer to transmit this monitor image to a
number of receiver monitors in large environments such as subway stations, bus
terminals, airports, restaurants, malls, banks etc.
The Galaxy Tx1 is a base unit with one VGA output and one UTP output.
The Galaxy Tx4 is a base unit with one VGA output and four UTP outputs.
The Tx1 and Tx4 can be fitted with different option cards:
• UTP-in Card for up to 125m distance
• UTP-in Card for up to 300m distance
• A skew compensator board
• Sound board on request and requirements
Features
• Up to 300 meters in one line without repeater
• Up to 1000 meters with 10 Galaxy Repeaters in 800 x 600 @ 75 HZ
• Compatible with the Galaxy Rx60 Receiver for building in and the external
Rx60, Rx125 or Rx300 version
• Sound or remote operation of monitors ON/OFF on request
Operation
The Galaxy is simple to operate, but need planning before installation, to obtain the
best picture quality.
Compatibility
This product has been tested with a wide variety of hardware. However, it is
impossible to guarantee correct operation with every monitor currently on the
market.
The Galaxy is compatible with the following equipment:
• Monitor: VGA, SVGA, XGA, SXGA, UXGA
• Computers: all computers using a HD-15 VGA output and standard VGA signals
RGB and two sync signals H/V
INTRODUCTION