Filter
Top Products
7
Voyager 125 Local
Tx1 w/UTPin
UTP
UTP in
Voyager 125 Remote
UTP
UTP
OUT
M
o
n
i
t
o
r
Galaxy Tx1 with UTPin module used as repeater for high resolution 1200 X 1600 over long
distance in a Voyager 125 system
Galaxy Transmitter and Galaxy receivers.
When planning large installations please chose the right boxes and configuration.
When working with Daisy chains please make a drawing with cable lengths of your
system and give the boxes a numbers so it is possible to locate the boxes on the
drawing. Write down the configuration for the box if it contains a delayline so you
can put in a spare box with the right settings.
Begin installation from the info-computer.
Connect a Galaxy Tx1 or Tx4 (without UTP-in module) to the Info-PC.
Put on a still test image on the info-computer.
A) Connect a Rx60 receiver to the first Galaxy. Connect a monitor to the Rx60;
adjust the R G B for the best picture.
B) OR Connect a Tx1/4 RepeaterStation or a Rx125/300; adjust the EQ and
Gain for the best picture.
The Galaxy products are made in many versions for special requirements: With and
BEFORE INSTALLATION
PROCEDURE FOR INSTALLATION