Filter
Top Products
34 Using the On-Screen Display
www.dell.com | support.dell.com
OSD Setup
OSD setup allows you to adjust the appearance of the OSD, set the channels when in TV mode,
change the language of the OSD (see "Selecting Your OSD Language" on page 30), and restore
factory settings.
If you are using the ANT/Cable connector, enter
Channel Setup
an select your region.
Use
OSD Hold Time
to increase or decrease the amount
of time the OSD appears. The maximum amount of time
is 60 seconds.
In the
OSD Setup
menu, you can select
TV Button Lock
to lock the buttons on the side panel. When this option
is enabled, only the power button functions. Hold the
volume increase and the channel increase buttons
together for 10 seconds to unlock the buttons.
If you are using the DVI connector, you may need to
verify the following settings:
Source
— The default setting is
Auto
. The TV automatically detects if a computer (PC) or video
device is being used. If the image does not display correctly, you can select the source,
PC
or
Video
,
depending on the device you are using.
Color
— The default color space is
RGB.
If the colors are not displaying correctly, you can change
the setting to
YUV.
Card Reader
A card reader allows you to view digital photos on your TV.
FACTORY RESET
LANGUAGE
CHANNEL SETUP
OSD SETTINGS
BACK
DVI SETTINGS
SETUP
MAIN MENU
EXIT
INPUT
SELECT
IMAGE
MGMT
PICTURE
COLOR
SETTINGS
PIP/POP
PBP
SIZE
SETUP