Filter
Top Products
- 6 -
COMMAND PARAMETER function example
Z2 PHONO MULTI ZONE -2 mode set , and select source Z2PHONO<CR>
| ---The name of PARAMETER is |
MD/TAPE2 the same as that of the time of SI COMMAND. Z2MD/TAPE2<CR>
SOURCE MULTI ZONE -2 mode cancel Z2SOURCE<CR>
UP MULTI ZONE -2 VOLUME UP/DOWN , direct change to ***dB Z2UP<CR>
DOWN Z2DOWN<CR>
** **:00 to 99 by ASCII , 80=0dB Z280<CR>
ON MULTI ZONE -2 ON/OFF change Z2ON<CR>
OFF Z2OFF<CR>
---Invalid at AVR-4802R
SR PHONO REC SELECT mode set , and select source SRPHONO<CR>
| ---The name of PARAMETER is |
MD/TAPE2 the same as that of the time of SI COMMAND. SRMD/TAPE2<CR>
SOURCE REC SELECT mode cancel SRSOURCE<CR>
SV DVD VIDEO SELECT mode set , and select source SVDVD<CR>
VDP SVVDP<CR>
TV SVTV<CR>
DBS/SAT SVDBS/SAT<CR>
VCR-1 SVVCR-1<CR>
VCR-2 SVVCR-2<CR>
VCR-3 SVVCR-3<CR>
V.AUX SVV.AUX<CR>
SOURCE VIDEO SELECT mode cancel SVSOURCE<CR>
SD AUTO set DIGITAL INPUT AUTO mode SDAUTO<CR>
PCM set DIGITAL INPUT force PCM mode SDPCM<CR>
DTS set DIGITAL INPUT force DTS mode SDDTS<CR>
RF set DIGITAL INPUT force RF mode SDRF<CR>
ANALOG set force ANALOG INPUT mode SDANALOG<CR>
EXT.IN-1 set EXT.IN -1 mode ---Set EXT.IN mode at AVR-4802R SDEXT.IN-1<CR>
EXT.IN-2 set EXT.IN -2 mode ---Invalid at AVR-4802R SDEXT.IN-2<CR>