Denon DBP-2012UDCI DVD Player User Manual


 
13
ENGLISH
Advanced versionSimple version InformationBasic version
Connecting a TV
•This connection is to connect the unit and a television directly.
•Check the television’s audio and video terminals and connect to one of them.
Cables used for connections
Audio and video cable
HDMI cable
(sold separately)
Audio and video
cable
(supplied)
R
L
R
L
(White)
(Red)
(Yellow)
Video cable
Component video
cable
(sold separately)
(Green)
(Blue)
(Red)
AUDIO
AUDIO
IN
LR
VIDEO
IN
VIDEO
VIDEO
COMPONENT VIDEO
Y P
B PR
IN
IN
HDMI
R R
L
L
TV TV
TV
TV
NOTE
•Do not connect this unit’s video output via a VCR (Video Cassette Recorder). Some media contain copy
prohibiting signals, which will disturb the screen image.
•The unit can play both NTSC and PAL discs.
n When connected to the television’s component video input terminal
Press
RESOLUTION
according to the resolution of the
connected television
(vpage 25).
•This unit’s component video output supports
480i/576i/480p/576p/720p/1080i output .
•Images will not be projected normally if the television resolution
and this unit’s output resolution do not match.
•Copyright protected DVD is output in 480i/576i or 480p/576p.
n Connecting to a device equipped with a DVI-D connector
Use an HDMI DVI-D conversion cable.
•The audio signal is not output. Make the appropriate audio connections for your devices.
•The video signal will be in RGB format.
•You cannot output to a DVI-D device that does not support HDCP (high-bandwidth digital content
copyright protection system).
•Video may not be output depending on the combination of devices.