Denon DVD-1200 DVD Player User Manual


 
15
EN
English
DVD
Analog Audio out Video out
Method 1 DVD Player + TV with Video Input Jack
Method 2 DVD Player + TV with S-Video Input Jack
Method 3 DVD Player + TV with Component Video Jacks
CBYCR
S-VIDEO IN
COMPONENT
VIDEO IN
VIDEO IN
PBYPR
LR
TV
Good pictureBasic Audio Better picture Best picture
S-Video out
Component Video out
AV Cable S-Video
Cable
Video
Cable
NOTES
If your TV is compatible with progressive scanning (480p), connect the TV to the Component Video Output jacks of the DVD
player. Refer to page 12.
Connect the DVD player directly to a TV. If the A/V cables are connected to a VCR, pictures may be distorted due to the
copy protection system.
S-Video output connector
The video signals are divided into color (C) and brightness (Y) signals, achieving a clearer picture.
If the TV is equipped with a S-Video input connector, we recommend connecting it to the this products S-Video output con-
nector using a commercially available S-Video connection cord.
HOW TO CONNECT TO A TV WITHOUT AUDIO/VIDEO INPUT JACKS
If your TV does not have RCA type audio and video input jacks it is still possible to connect this DVD
player to your TVs 75-ohm coaxial antenna terminal using an optional Stereo Audio/Video RF Modulator, not includ-
ed. Connect the audio and video outputs of the DVD player to the audio and video inputs on the RF Modulator, and
then connect the coaxial output of the RF Modulator (usually marked TO TV) to the 75 ohm coaxial antenna termi-
nal on your TV. Follow the instruction supplied with the RF Modulator for more details.
If your TVs 75 ohm coaxial antenna terminal is already occupied by an antenna or cable box connection, remove that
cable from your TVs antenna terminal and reconnect it to the coaxial antenna input terminal of the RF Modulator
(usually marked ANT IN), then connect the RF modulator to your TVs antenna
terminal as described above.
NOTE
The picture quality from DVD discs will not be as good if the DVD player is connected to the TVs antenna terminal
through an RF Modulator.
Connection to a TV (for video)
Method 1 Method 2 Method 3
HOOK UPS