Filter
Top Products
TroubleshootingInformationHDMI Control FunctionPlaybackSetupGetting Started Specications
ENGLISH
1. Home Theater Playback – Playing Back Using Multi-channel System –
Connection to an AV Amp with No HDMI Video Input
Check the video terminals and make the connection to one of them.
7*%&0
7*%&0*/
47*%&0*/
:
1#
13
$0.10/&/5
7*%&0*/
AV Amp
2. Playing Back with a Direct Connection to a TV
Check the television’s audio and video terminals and make the connection to one of them.
"6%*0
"6%*0
*/
-3
7*%&0
*/
7*%&0
7*%&0
*/
47*%&0
7*%&0
$0.10/&/57*%&0
: 1#
13
*/
*/
)%.*
R
L
R
L
TV
Audio terminals Video terminal S video input
terminal
Component video
input terminal
HDMI input
terminal
TV TV TV TV
(Sold
separately)
When outputting the DVD-A1UD’s analog 2-channel audio to the television’s 2-channel (stereo) audio
input terminal, on the GUI menu, select “Audio Setup” – “7.1ch Audio Out”, and set it to “2 Channel”
(vpage 27).
NOTE
Do not connect the DVD-A1UD’s video output via a VCR (Video Cassette Recorder). Some media
contain copy prohibit signals, which will disturb the screen image.
When playing NTSC disc, DVD-A1UD’s video output becomes NTSC signal format.
When playing PAL disc, DVD-A1UD’s video output becomes PAL signal format.
(supplied)
(supplied)
(Sold
separately)
(Sold
separately)
NOTE
DENON LINK does not support BD audio transmission.
When connecting to a DENON LINK-compatible AV Amp, the multi-channel signals of DVD-Audio
discs, Super Audio CDs, etc., can be transferred as such in digital format.
DENON LINK connection requires that the version of AV Amp to be connected match the DVD-A1UD
version. Check the version of the AV Amp, and then on the GUI Menu, set “DENON LINK Setup”
– “DENON LINK Mode” (vpage 30).
If the DVD-A1UD and AV Amp versions do not match, audio cannot be output correctly.
•
•
%&/0/-*/,
"6%*0
AV Amp
DENON LINK supports digital transmission up to 24 bit/2 ch at 192/176.4 kHz, and up to 24 bit/6 ch
at 96 kHz or less.
When you have made a DENON LINK connection, the DVD-A1UD’s speaker setting becomes invalid.
(Make the speaker setting on the connected AV Amp)
DENON LINK 2nd cannot transmit multi/stereo area audio of Super Audio CD.
•
•
•
DENON LINK Connection w Making a Normal Connection
Connections