Filter
Top Products
General
Audio
Contrast
Contrast
0
Dolby
Video
Preference
SYSTEM SETUP
15
CONTRAST: Sets the contrast level of Video output.
Press right button the TV will display below.
4.5 CONTRAST
The preference setting is active only when no disc,
and the setting is effective on each time power on till
exchanging the saved setting.
5. PREFERENCE SETUP PAGE
5.1 TV TYPE
TV TYPE: This player supports different TV output,
including MULTI(Auto), NTSC, and PAL systems.
lf your TV support only NTSC or PAL and had you
inadvertently selected the wrong TV type, the TV
screen will become flickering and black-and-white.
In this case, you should press the SETUP button
to set as following Note.
Note: How to Set the TV Type?
You may switch the NTSC/PAL setting of the DVD
player to match the video signal of your TV.
The table below shows what kinds of disc are com-
patible with each setting (MULTI, PAL and NTSC)
5.2 AUDIO
AUDIO: Sets the preferred audio language as the
default when playing DVD. (IF DVD support these
languages)
Dolby
Video
Preference
General
Audio
Video Setup Page
Component
TV Mode
Sharpness
Brightness
Contrast
YUV
Low
00
00
Contrast
Dolby
Video
Preference
General
Audio
Preference Page
TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default
AUTO
E
Off
E
ng
ng
PAL
Multi
NTSC
Set TV Standard
Dolby
Video
Preference
General
Audio
Preference Page
TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default
AUTO
E
Off
E
ng
ng
English
French
Spanish
Chinese
Japanese
Korean
Russian
Thai
Preferred Audio Language
Press LEFT / RIGHT button to adjust, then press
ENTER/PLAY button to confirm and return upon
menu.