Digimate DGL20 Flat Panel Television User Manual


 
3
WARNING
To reduce the risk of fire or
electric shock, do not
expose the product to
water, and never open the
rear cover.
TO PREVENT POSSIBLE DANGER, ELECTRIC SHOCK, AND OTHER INJURIES WHEN
HANDLING YOUR DISPLAY, PLEASE BE AWARE OF ALL WARNINGS AND SAFETY
PRECAUTIONS CONTAINED BELOW.
Never Insert anything into DISPLAY!!
¾ Do not insert anything through the openings in the unit, where they
can touch dangerous voltage points or damage parts.
¾ Never spill liquid of any kind on the Display
Do not attempt to service the DISPAY yourself!!
¾ Opening or removing covers may expose you to dangerous voltages and
other hazards. Refer all servicing to qualified service personnel.
Note:
Read all safety and operating instructions before
operating your new Display.
To ensure good ventilation, a distance of more than
4 inches should be maintained between the Display
and any other furniture.
Do not touch your DISPLAY and antenna during thunderstorms!!
¾ Unplug the Display during thunderstorms or if it is not going to be
used for an extended period.
¾ Failure to do so may result in electric shock or fire.
ATTENTION!!!!
¾ Unplug the DISPLAY from the wall socket before cleaning.
¾ Use a damp cloth for cleaning.
¾ Do not use liquid or aerosol cleaners.
Well ventilation is required!!
To ensure reliable operation of the product and to protect it from overheating, the ventilation
must not be blocked or covered.
¾ The DISPLAY should be no less than 4 inches away from the wall, and
always keep the vent clean.
¾ Do not place your DISPLAY in a cramped and inadequately ventilated place.
¾ Avoid placing your DISPLAY upside down at any time.