Filter
Top Products
5
Rear View
Getting Started
Rear Panel Jacks
Side view
1
Y1Cb1Cr1
Video Component1 Input terminal accepts video signal from a Component Video Source
(INTERLACED only)
2
Y1Cb1Cr1 Audio L&R Audio input corresponding with Video Component1
3
Y2Pb2Pr2
Video Component2 Input terminal accepts video signal from a Component Video Source
(PROGRESSIVE SCAN or INTERLACED)
4
Y2Pb2Pr2 Audio L&R Audio input terminals corresponding with Video Component2
5
S-video S-Video Input terminal accepts video signal from a S-Video source.
6
S-video Audio L&R Audio input terminals corresponding with S-Video source.
7
Sub-woofer Provides a dedicated Sub output signal to drive an external Powered Subwoofer (optional)
8
Video out
Provides a Video output signal.
(Video output is available only from; AV1, AV2, AV3 and TV sources)
9
Audio out
Provides a Stereo Audio output signal.
(Audio output is available only from; AV1, AV2, AV3, TV sources)
10
AV 1 in To connect the AV1 Video source.
11
AV 1 audio in To connect the Audio corresponding to AV1 source
12
AV 2 in To connect the AV2 Video source.
13
AV 2 audio in To connect the Audio corresponding to AV2 source
14
AV 3 audio in To connect the Audio Corresponding to AV3 source
15
AV 3 in To connect the AV3 Video source.
16
Headphone Provides L&R Audio output to connect a set of headphones.
Bottom view
1
PC Audio In Accepts the Audio signal from your PC or Laptop.
2
ANT Connect the coaxial cable (75 Ohm) or antenna here.
3
D-sub Connects to D-sub 15 pin analog RGB Video from your PC or Laptop.
4
DVI for PC Connects to DVI digital video output from your PC or Laptop.
5
AC in
Connect the power cord supplied to this terminal and then turn on the Main Power switch right
next to power cord terminal.
Use Y1Cb1Cr1/Y2Pb2Pr2,
AV, or S-video to connect
the VCR, DVD or the Video
Game.
Audio cable connects to PC audio
VGA cable connects to VGA card.
DVI cable connects to DVI card (if DVI cable is available)
Connect the
power supply
ANT
Connect the cable or antenna
Adapter