Filter
Top Products
.
Page 7 Page 8Page 6
C4
TO SEARCH BY EVENT: Click on Event search
option (GREEN box)(C1). This will display the
EVENTS screen shown (C4). Select camera(s)
(RED box), and the event type (motion or sensor)
(GREEN box), then select the le you want to play
and select Enter.
NOTE: Recording will not be interrupted while you
are in Playback mode.
Backup Files
D
3
Enjoy
Congratulations! You have just completed the Quick Start Guide.
If you require further assistance after reading the User Manual,
please contact Technical Support:
On the Web: (24/7) Visit the Technical Support Section
www.Q-See.com
By Phone: (Monday thru Friday, 9am-5pm (PST)
1 (877) 998 3440, ext 539
By Email:
ts@dpsi-usa.com
For more information about Q-See Products, please contact customer service:
1 (877) 998 3440, ext 538 (Monday thru Friday, 9am-5pm)
or view our selection online at www.Q-See.com
C3
Select the number of cameras you wish to display
(RED box) and put check marks in the boxes for the
cameras to display. For example: (C3) illustration, 4
camera view has been selected displaying cameras
2, 4, 9, and 12. The area on the time line in GREEN
show les available, the top line is hours and the
bottom line is minutes. Use Direction Keys to select
the time you want, and then click the PLAY icon to play
D1
D2
Tip: If you stop recording while backing up the
les, the backup will go faster.
Insert a USB ash drive or USB hard drive
into the USB port on the back of the DVR.
Push the BACKUP button on the DVR front
panel, which will display the Backup window
(D1). (If the system is password protected it
will ask for a user name and password.)
Select the camera (red box), and use
DIRECTION KEYS and ENTER on the DVR
front panel to select the start time and end
time. Change the date by clicking the DATE
button on the screen. Click BACKUP, which
will display the Backup Info window (D2).
Click OK to begin backup.
A Progress Bar will display. When the backup is complete, a dialog box will appear
as “Backup Complete”. You can now play these backup les in a third party media
player installed on your PC.
Setting Up Your DVR for Network or Internet Access:
For instructions, please refer to the Remote Access Quick Start Guide.
For additional help with port forwarding for internet access, please visit website:
www.portforward.com/qsee