Q-See QSNDVR9M and QSNDVR16M DVR User Manual


 
LOCK/UNLOCK: Lock/unlock the record. Use enter key to change the status (Fig 3.2.24 Lock/Unlock file).
If the file is locked, then the record can not be deleted or overwritten even though the HDD is full.
DELETE ALL:
If the DVR is recording, the system will Post:
“DELETE ALL
STOP RECORDING AND TRY”
Once the recording is stopped, the system will send reminder that: (Fig 3.2.25 Delete all the file)
“ALL RECORDED FILES WILL BE DELETED
ARE YOU SURE?
[ENTER] YES [MENU] NO”
Press ENTER key to delete all the records or press MENU key to cancel this operation.
3.2.4 SETUP-STORAGE (Fig 3.2.26 Setup storage)
OVER WRITE: If you choose YES, the DVR will have continuous recording and over write from the
oldest file when HDD is full. The DVR overwrites file from the oldest file. If you choose NO, the DVR
will stop recording when the HDD is full.
FORMAT: Use the “Up” and “Down” keys to choose HDD that you want to format. A warning pops up
after pressing “ENTER”.
“DISK HDD-*
MOUNTED
ARE YOU SURE?
Page 50