Filter
Top Products
37
© 2004 directed electronics, inc.
QUICK REFERENCE GUIDE
Arming
■ To arm, press . When the system arms, you will hear a short chirp, and
the parking lights will flash once.
Arming while driving
■ To arm the system while driving, press on your transmitter while the
vehicle is running. The system will chirp once and then once more to indi-
cate that the ignition is on.
Disarming
■ To disarm, press . You will hear two chirps, and the parking lights will
flash twice.
High security disarm
■ For high security disarm, press on your transmitter and the siren will stop
sounding. To completely disarm the security system, press again and the
system will chirp 4 or 5 times (reporting the trigger).
Disarming without a transmitter
■ Turn on the ignition. Press the Valet
®
switch within 15 seconds. The system
should now disarm. If it does not, you may have waited too long, so turn the
ignition off and on and try again.
Silent Mode
™
■ Pressing briefly before arming or disarming will eliminate the confirma-
tion chirp(s) for that one operation only.
Panic Mode
■ Press for 2 seconds, and you will enter Panic Mode. The siren will sound
and the parking lights will flash for 30 seconds. To stop Panic Mode at any
time, press on the transmitter again.
To remote start the vehicle
■ Press twice within 3 seconds. The parking lights will turn on (if
connected) and the vehicle will start and run for the programmed period of
time.
To disable the remote start system
■ To disable the remote start, move the shutdown toggle switch to the OFF
position.
Location of Valet
®
switch_________________________________
Number of Valet
®
switch pulses for disarming_______________
Cut along dotted line and fold for a quick and easy reference to keep in your purse or wallet.
✂
✂