Filter
Top Products
12
© 2008 Directed Electronics. All rights reserved.
Hood Trigger - Opening the hood will sound the siren, ash the lights for the programmed duration, and •
report Zone 1.
Trunk Trigger - Opening the trunk (if connected) will instantly sound the siren and ash the lights for the pro-•
grammed duration and report Zone 4.
Ignition Trigger - If the ignition is turned on the siren will chirp for three seconds, then the siren will sound and •
the lights will ash for the programmed duration and report Zone 5.
When a Triggered Response is activated the transceiver will:
Repeat four quick beeps (or vibrate) for 15 seconds. •
The full trigger alert icon (28) will turn on for 15 seconds.•
➤ Setting the clock
To set the clock press and hold
for five seconds, the transceiver will chirp twice and the hour selection will
start ashing. Immediately press
to advance the hour selection or to reverse the hour selection.
Once the correct hour is displayed press
again and the minute selection will start ashing. Then press
to
advance the minute selection or to reverse the minute selection. Once the correct time is displayed simply
stop pressing all buttons for 15 seconds and the transceiver will automatically exit the clock mode.
➤ Temperature check mode
This system will report the interior temperature of your vehicle with the press of three buttons. To activate the tem-
perature display press
,
and simultaneously and then release. You will hear a melody and the interior
temperature will appear on the LCD screen for ve seconds.
Note: If the ignition is on, the temperature check will
not work.
➤ 24-hour timer mode
To enter 24 hour timer mode, press
and simultaneously. The 2-way remote will produce a melody and
the clock indicator will appear on the remote’s LCD. Once in Timer Mode, the system will remote start every 24
hours. Repeat this procedure to turn 24 hour Timer Mode off.