Filter
Top Products
4 118866
To use these added buttons and other features to control
your TV, follow the step-by-step instructions below to set
up your remote control. This setup also requires you to
connect your satellite receiver to your TV’s tuner using
coaxial cable. After completing your setup, see How to
Use the Remote Control on page 25 for more details on
each button.
INSTALLING BATTERIES
Before you can use the remote control, you must install
four AAA batteries. Use batteries of the same grade, for
example, alkaline or carbon zinc, and do not mix different
grades. Alkaline batteries provide longer battery life.
1. Press down on the arrow on the battery cover and
slide off the cover.
2. Insert the new batteries, making sure that the ends
marked “+” are installed as shown inside the battery
compartment.
3. Replace the battery cover by sliding the cover back
into place.
CLOS E
OPEN