Filter
Top Products
DVD Player + TV + VCR + Satellite Receiver
1. Insert the audio cables to the AUDIO OUT L (left -white) and R (right-red) jacks on the back of your DVD Player, and
into the corresponding AUDIO IN jacks on your TV.
2. Connect the video cable.
Basic video connection - Insert the video cable (yellow) into the VIDEO OUT jack on the back of your DVD
Player, and into the VIDEO IN jack on your TV.
OR
S-Video (optional) - If your TV has an S-Video Input jack, insert the S-Video cable into the S-VIDEO OUT jack on
the back of your DVD player and into the S-Video jack on your TV. If your TV doesnt have S-Video, use the basic
video connection listed above as on Page 4 (yellow plugs: VIDEO IN or OUT, are not needed for S-Video).
3. Use an antenna cable to connect the antenna output on the satellite receiver to the antenna input on the VCR the
same as you have it connected now. This DVD player does not change any antenna connections.
4. Insert the AC power cord into an AC outlet.
5. Go to Page 20 for playing DVDs (discs).
CONNECTIONS
9
This antenna connection is
the same as you have now.
IB-DVD2003-COMPUSA-E-061202
-
(
)
3