Filter
Top Products
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS
RISQUE DE CHOC ELECTRIQUE NE
PAS OUVRIR
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PART INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
2
Safety precautions
The lightning flash with an arrowhead symbol inside an
equilateral triangle is intended to alert the user to
the presence of uninsulated „high voltage“ within the
product‘s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point inside an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING: DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE, DUE TO THE HIGH RISK OF
FIRE OR ELECTRIC SHOCK, DO NOT OPEN THE HOUSING AS DANGEROUS HIGH VOLTAGES
ARE PRESENT INSIDE THE HOUSING. ONLY QUALIFIED SERVICE PERSONNEL SHOULD
ATTEMPT THIS.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
AND FULLY INSERT.
CAUTION: This Digital Video Disc Player employs a Laser System. To prevent direct
exposure to the laser beam, do not try to open the enclosure. Visible laser
radiation when open and interlocks defeated. Use of controls or adjustments
or performance of procedures other than those specified herein may result in
hazardous radiation exposure. DO NOT STARE DIRECTLY AT THE BEAM.
To ensure proper use of this product, please read this user’s manual
carefully and retain for future reference. Should the unit require
maintenance, contact an authorized service location, or contact us.
Only qualified service personnel should remove the cover.
FCC NOTICE: This equipment has been tested and found to comply with the regulations for a
Class B digital device. Pursuant with the FCC Rules, Part 15. These regulations
are designed to provide reasonable protection against harmful interference in
a residential area.
This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the user’s manual, may cause
harmful interference to radio communication, However, this is no guarantee
that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one of the following measures:
• Adjust or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:To assure continued compliance, (e. g. – use only shielded interface
cables when connecting to computer or peripheral devices). Any changes or
modifications not expressly approved by the party responsible for compliance
could invalidate the user’s authority to operate this equipment.
WARNING: Changes or modifications made to this equipment,
not expressly approved by us or parties authorized
by us will invalidate all the manufacture warranties.
CLASS 1
LASER PRODUCT