Filter
Top Products
5
Connections
AV connection to a TV set
with 21-pin scart terminal
!
Peripheral equipment and cables, sold
separately unless otherwise indicated.
!
When playing some DVD discs, TV volume level
may be lower than from some other sources,
adjust the TV volume to your desired level.
Disc playback
1. Press the POWER button (1) displayed on
the front panel.
2. Press the OPEN/CLOSE button (2).
This will open the disc tray, and
place a playable disc on it with
the playback side down.
3. Press ENTER/PLAY (3).
After closing the disc tray, playback will start.
As the DVD video player is reading the disc, a
menu will appear on screen or you may access
the menu by pressing the TITLE button (4).
4. Select a title/chapter or track.
Press and (5) during playback to move
between tracks.
You also can press (6) or the number
buttons to select the title/chapter or track.
!
Moving the DVD video player during playback may cause damage to the disc as well as the
player.
!
To open and close the disc tray, you may only use the OPEN/CLOSE button on the remote
control or DVD video player.
!
If the picture on TV screen will keep going up and down, press the P/N button on the remote
control to set the correct type, PAL or NTSC or just MULTI.
5. Stop playback
Press the STOP button
(7)
once, the player is
stopped, and you can
press the RESUME
button
(8)
to replay from
the point stopped.
Press the STOP button (7)
twice, the player is
stopped, then press the
ENTER/PLAY button
(3)
to
playback from the start.
1
2
3
4
7
5
6
6
66
8
2