Filter
Top Products
9
1. Introduction
¿ Part Names of the Remote Control
1. Infrared Transmitter/Laser Pointer
Tr ansmits an infrared signal when any button other
than LASER is pressed.
Direct the remote control toward the remote sensor
on the projector cabinet.
Beams a laser light when the Laser button is pressed.
CAUTION:
* Do not look into the laser pointer while it is on.
* Do not point the laser beam at a person.
2. LED
Flashes when any button is pressed.
3. POWER ON Button
When the main power is on, you can use this button
to turn your projector on.
NOTE: To turn on the projector, press and hold the
POWER ON button for a minimum of two seconds.
4. POWER OFF Button
You can use this button to turn your projector off.
NOTE: To turn off the projector, press the POWER
OFF button twice.
5. MAGNIFY (+)(–) Buttons
Use these buttons to adjust the image size.
The image can be magnified about the center of the
screen up to 400%. See page 40.
6. LASER Button
Press and hold this button to activate the laser pointer.
When lit, you can use the laser to draw your audience's
attention to a red dot that you can place on any ob-
ject.
7. POINTER Button
Press this button to display the projector pointer. You
can move your pointer icon to the area you want on
the screen using the Select button. See page 39.
8. PAGE UP/DOWN Buttons
Use these buttons to operate your computer with the
supplied remote mouse receiver. You can use these
buttons to scroll the viewing area of the window or to
move to the previous or next slide in PowerPoint on
your computer.
9. MENU Button
Displays the menu for various settings and adjust-
ments.
VOLUME
3D REFORM
POINTER
LASER
MAGNIFY
PAGE
OFF
POWER
ON
PIC-MUTE
FREEZE
UP
1
2
DOWN
PICTURE
SLIDE
AUTO ADJ.
ASPECT
HELP
VIEWER
LAN
COMPUTER
S-VIDEO
VIDEO
1
4
5
7
9
11
8
6
13
15
3
2
20
17
12
10
16
21
18
24
23
29
25
27
28
19
26
22
14