Filter
Top Products
Dynaudio Evidence 13
Running-in / Care & Maintenance
Running-in / Care & Maintenance
Running-in the loudspeakers The moving parts of a newly manufactured loudspeaker have been acoustically checked
after production, but nevertheless are not as flexible as they need to be for optimum
results to be realized. The higher the quality of any driver system, the more demanding
the loudspeaker will be regarding time for running-in the system.
A newly unpacked Dynaudio loudspeaker therefore requires several weeks running/
playing to reach its optimum performance capability. After that period, a couple of minutes
before every listening session will be helpful to “warm up” the loudspeakers.
Power rating Due to the construction and the driver technology the Dynaudio loudspeakers can be
driven with very high power levels. With a high quality amplifier, delivering undistorted
signals, the speaker can achieve high volumes without any compromises in sound quality.
Attention must be given to amplifiers with very low power and adjustable tone controls or
switches. These types may soon overreach their own performance limits and may send
distorted output signals to the speakers, compromising even high quality technology.
Any damage caused under such circumstances is not covered by the Dynaudio warranty
and is easily avoided in the first place by consulting your Dynaudio dealer for advice
regarding the choice of amplifier.
CAUTION
DISTORTED OUTPUT SIGNALS
Distorted output signals from too weak, defective or overloaded amplifiers may damage
the loudspeakers.
X Use high quality amplifiers only and run loudspeakers and amplifiers within specified
power ratings.
Evidence
.
book
Seite
13
Montag
,
12
.
Januar
2009
2:04
14