Filter
Top Products
7” and 9” Dual-Screen Portable DVD Players
11
Using your player
Playing a DVD or audio CD
To play a disc:
1 Make sure that your player is connected to power.
2 Slide the ON/OFF switch to the ON position.
3 Slide the OPEN switch. The disc tray opens. For the location of the OPEN switch, see “DVD
player (7” and 9”)” on page 4.
4 Place a disc, label side up, in the disc tray, then close the tray. The disc starts playing
automatically.
Controlling DVD or audio CD playback
To control disc playback:
• Press (STOP) once to stop playback. Your player remembers where you stopped. If you
press , your player starts playing at the point where you stopped.
• Press (STOP) twice to stop playback. If you press , your player starts playing at the
beginning of the disc.
• Press to pause playback. Press this button again to resume playback.
• Press to fast-forward the disc. Each time you press this button, the fast-forward speed
changes from 2 to 4 to 8 to 16 to 32 times the normal speed.
• Press to fast-reverse the disc. Each time you press this button, the fast-reverse speed
changes from 2 to 4 to 8 to 16 to 32 times the normal speed.
• Press (NEXT) to go to the next title, chapter, or track.
• Press (PREV) to go to the previous title, chapter, or track.
Adjusting the volume
To adjust the volume:
• Rotate the volume control on the right side of your player.
Note
Most DVDs and your player have region codes that help control
illegal distribution of DVDs. The region code for your player is 1.
You can only play DVDs with a region code of 1. The region code
for a DVD is printed on the DVD or the DVD packaging.
DX-D7_D9PDVD_12-0605_MAN_V1_EN.fm Page 11 Tuesday, June 26, 2012 9:10 AM