Filter
Top Products
13
DX-WD1201
Need help? Call 800-305-2204
Step 7:
Carefully stand your stand upright.
Push the rubber sleeves (Q) over the remaining metal pins (P). Insert the metal pins (P) into the hole locations
of your choice in the right end (A) and upright (C). Set the adjustable shelf (H) onto the metal pins (P).
Apply the warning label (S) to the top (D). You should be able to read the label when the TV is removed from
your stand. When the TV is in place, it should hide the label. Peel off the backing and apply the label as
shown.
Caution: This is a permanent label intended to last for the life of the product. Once applied, do not try to
remove it. You may damage the finish on the top.
Push a cam cover (R) onto each visible hidden cam (M2).
Clean with your favorite furniture polish or a damp cloth. Wipe dry. Your stand is ready to use.
You’ll need:
Warn
i
ng: Never use t
hi
s
f
urn
i
ture w
i
t
h
a TV
that is too large or too heavy. Severe injury
or death can occur. The TV and furniture
will be unstable and may tip.
• The TV must weigh less than 95 lbs.
• The base of the TV must be able to sit
completely on this shelf.
P and Q
R (13)P (4) Q (4)