Filter
Top Products
Page 10
14. Inside vehicle, connect main coax from the dome unit directly to the “satellite in” port of
the main receiver. Do not go through an “A-B” or any other switch, box, or booster.
Connect auxiliary coax directly to optional second receiver.
15. Connect red and black two conductor wire to a power source and ground. Red connects
to +12 volts, and black connects to ground.
16. Plug phone style Controller Cable into Controller.
IMPORTANT: The connection between the dome unit and the receiver must be a direct
connection with no devices in between. Any other devices should be
downstream from the receiver.
IMPORTANT: Power connection must be a non-shared circuit. Excessive current draw
on the circuit will cause the unit to operate improperly. Power and ground
connections must be made after the wires are connected to the dome unit.
INTERNAL WIRING