Filter
Top Products
Page 9
REMOVING THE OTA MODULE
Do not remove the OTA Module unless necessary as you will no longer
be able to tune to your over-the-air channels if the module is removed.
1. Unplug the receiver’s power cord from the electrical outlet.
2. Disconnect any cables connected to the module’s
OVER THE AIR
A
NTENNA IN port and/or CH 3-4 OUT port.
3. Remove the screws connecting the module to the receiver’s back
panel. Gently remove the module.
4. Replace the module port cover and attach it to your receiver using
the screws that had connected the module.
5. Plug the receiver’s power cord into the electrical outlet, and turn it
back on.
6. Store the OTA Module in the original box when it is not installed in
the receiver.
OTA Module.book Page 9 Thursday, July 3, 2008 4:35 PM