Filter
Top Products
Page 5
4. Connect the cable from your over-the-air antenna to the
OVER-THE-
A
IR ANTENNA IN port on the module (see Figure 3). Only one cable
is needed because the module has an internal splitter to provide the
dual-OTA tuner capability.
Figure 3. Connecting the Over-the-Air Antenna
5. Plug the receiver’s power cord into the electrical outlet. Turn the
receiver back on after it has reset itself.
TO
OVER-THE-AIR
ANTENNA
OTA Module.book Page 5 Thursday, July 3, 2008 4:35 PM