Filter
Top Products
LC-XT1
.
1
Turn the projector on, and press the MENU button and the ON-
SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to
select SETTING and press the SELECT button. Another dialog box
SETTING MENU will appear.
2
Press the POINT DOWN button and a red-arrow icon will appear.
Move the arrow to “Lamp age” and then press the SELECT button.
3
Move the arrow to replaced lamp number and then press the SELECT
button. The message “Lamp replace monitor Reset?” is displayed.
NOTE: Be sure to reset correct lamp number otherwise LAMP REPLACEMENT indicator continues lighting.
4
Select to reset the Timer.
Do not reset the Lamp Replacement Monitor Timer, except after the lamp is
replaced.
-
The language used in the ON-SCREEN MENU is selectable from
among English, German, French, Italian, Spanish and Japanese.
1
Press the MENU button and the ON-SCREEN MENU will
appear. Press POINT LEFT/RIGHT buttons to select LANGUAGE
and press the SELECT button. Another dialog box LANGUAGE
Menu will appear.
2
Press the POINT DOWN button and a red-arrow icon will
appear. Move the arrow to the language that you want to set,
and then press the SELECT button.