Filter
Top Products
68
Indicators and Projector Condition
Check the indicators for the projector condition.
Indicators
Projector Condition
LAMP
red
READY
green
WARNING
TEMP.
red
LAMP
REPLACE
orange
The projector is off. (The main switch is OFF position or the AC power
cord is unplugged.)
The projector is in stand-by mode. Press the ON/STAND-BY button to
turn on the projector.
The projector is operating normally.
The projector is preparing for stand-by or the projection lamp is
being cooled down. The projector cannot be turned on until cooling is
completed and the READY indicator lights green.
The projector is in the Power management mode.
The projector is operating normally.
• • • on
• • • off
• • • blinking at the normal rate
(approx. 1 second ON,
1 second OFF)
• • • dim
• • • blinking slow
(approx. 2 seconds ON,
2 seconds OFF)
• • • blinking fast
(approx. 0.5 seconds ON,
0.5 seconds OFF)
✽
✽
✽
✽
Appendix
✽
When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights orange.
When this lights orange, replace the projection lamp a new one promptly. Reset the lamp
counter after replacing the lamp (p.57)