Filter
Top Products
31
Computer Input
Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical
positions to conform to your computer.
Move the red frame pointer
to Auto PC Adj. and press
the SELECT button.
“Please wait...” appears
while the Auto PC
adjustment is in process.
PC Adjust Menu
PC Adjust Menu icon
Auto PC Adjustment
Remote Control
AUTO PC button
The Auto PC adjustment function can be operated directly
by pressing the AUTO PC button on the remote control.
Direct Operation
To store adjustment parameters
The adjusted parameters from the Auto PC Adjustment can
be stored in the projector. Once the parameters are stored,
the setting can be done just by selecting a Mode (1–5) in
the PC System Menu (see page 30). See also “Store” on
page 33.
✔Notes:
•Fine sync, Total dots, Horizontal and Vertical position of some
computers cannot be fully adjusted with the Auto PC Adjustment
function. When the image is not provided properly with this
operation, manual adjustments are required (pp.32–33).
•The Auto PC Adjustment cannot be operated when 480i, 575i,
480p, 575p, 720p,1035i, or 1080i is selected in the PC System
Menu (p.30), or when the signal is coming from the DVI-terminal.
Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red
frame pointer to the PC Adjust Menu icon.
1
2
Use the Point ed buttons to move the red frame
pointer to Auto PC Adj. and then press the SELECT
button twice.
Auto PC Adj.
Menu Operation