Filter
Top Products
DMX OPERATOR PRO
13
7.2 Assign Joystick to Pan & Tilt (Cont.)
(8) If your lights incorporate Pan Fine and Tilt Fine channels, repeat steps 4 thru 7.
(9) Next, press and hold down the "GROUP" button and simultaneously select
the "FIXTURE" number buttons to select the lights you wish to assign the
joystick to. All selected fixtures will have the LED above the buttons flashing.
(10) Now that you’ve assigned your Pan and Tilt channels to the joystick, you need to
confirm and save these settings to memory. To do this, press the "RECORD" button
one (1) time. The LCD display will momentarily read "GOOD". You can now exit menu
mode by pressing the "ESC" button two (2) times. You now should have control of
the pan and tilt using the joystick for all assigned lights.