Filter
Top Products
60
Presetting Remote Control Function
You can operate the connected AV products (AV
receiver, cable box, SAT tuner, DTV, VCR, BD, DVD,
LD) using the presetting manufacturer function of your
remote control unit.
Presetting manufacturer codes
1
Press an appropriate button (STB, BD
•
DVD or
AUDIO) to operate the connected equipment.
2
Press an appropriate button (STB, BD
•
DVD or
AUDIO) and DISPLAY at the same time to enter
the code registration mode.
3
Press 0–9 to enter the manufacturer code.
• Preset mode is fi nished once the LED no longer lights
up.
4
After registering the code, the LED will stop blinking
then turn off after one second. (If you perform an
incorrect operation, the LED will blink quickly then
turn off.)
Other Viewing Options
Manufacturer codes
STB mode
REMOTE CONTROL CODE
NUMBER
CATV
Pioneer 01, 02
SAT
Pioneer 03
BD/DVD mode
REMOTE CONTROL CODE
NUMBER
BD
Pioneer 01, 02
DVD
Pioneer 03
DVR
Pioneer 04, 05, 06
LD
Pioneer 07
VCR
Pioneer
SHARP
08, 09
13
BD/DVD
SHARP 10, 11, 12
AUDIO mode
REMOTE CONTROL CODE
NUMBER
AUDIO
SHARP
SHARP
(SOUND BAR)
01
02