Filter
Top Products
User Manual: Interactive Digital Signage
SW601990 Rev E, Page 17 of 36
Parameter Available Adjustment
Main Menu
Video Settings, Audio Settings, Color Settings and Other Settings can be selected
Video Menu
Video Source, Brightness, Contrast, Black Level, Sharpness and Aspect Ratio are
available in this menu.
Video Source
Allows the user to switch between the available video sources.
Audio Menu
Allows the user to toggle the mute setting.
A
lso, the volume of the internal speakers or
headphones can be adjusted.
Default: Not Muted, Volume at 50
Color Menu
Displays the Color Adjust and Color Preference Menus
HDMI
Allows HDMI video to be displayed on the monitor
VGA Port
Allows VGA video to be displayed on the monitor
DisplayPort
Allows DisplayPort video to be displayed on the monitor
Elo Computer
Module
ECM DP – DisplayPort is the standard video output of Elo Computer modules. If
HDMI video input is found, the video source can be switched.
Video Source
The monitor continually scans for active video from VGA, DisplayPort, HDMI, and the
Computer Module. This adjustment selects which of those input ports should be
displayed.
If an Elo Computer Module or Intel OPS computer module has been detected, video
priority is given to the computer module before any of the external sources.
Brightness
Increase/decrease monitor brightness.
Default: 65
Contrast
Increase/decrease monitor contrast.
Default: 50
VGA Settings
Allows user to change the H. position, V. position, Clock and Phase.
If VGA is selected, the Auto-Adjust feature is available.
Sharpness
Adjusts sharpness of the displayed images.
Default: no sharpness adjustment
Sharpness function is disabled when the input source ratio is the same as the panels
native ratio