Filter
Top Products
10
ANTENNA CONNECTIONS
Insert the Rod Antenna on top of the rear cabinet and connect other end to the antenna jack as
shown below.
CONNECTING THE ROD ANTENNA (NOT SUPPLIED).
ROD ANTENNAAND ADAPTOR ARE NOT SUPPLIED.
OUTDOOR ANTENNA CONNECTIONS
Follow the instructions for the type of antenna system you intend to use. If using cable or
Satellite, see page 8.
OUT DOOR VHF/UHF ANTENNA CONNECTION(ANTENNANOT SUPPLIED)
Combination VHF/UHF Combination VHF/UHF
Antenna(Single 75 ohm cable Antenna(separate VHF and Separate VHF/UHF
Or 300 ohm twin-lead wire) UHF 300 ohm twin-leads) Antennas
Connect the 75 ohm cable
from the VHF Connect
antenna and the UHF
antenna twin-lead wire to a
combiner(NOT SUPPLIED).
Attach the combiner to the
antenna jack.
Connect the 75 Ohm cable
form combination VHF/UHF
antenna to the antenna jack.
OR
If your combination antenna
has a 300 ohm twin-lead
wire, use a 300-75 ohm
matching transformer
(NOT SUPPLIED)
Connect the UHF twin-lead
wire to a combiner (NOT
SUPPLIED). Connect the
VHF twin-lead to a 300-75
ohm matching transformer
(NOT SUPPLIED).Attach
thetransformertothe
combiner.Attach the
combiner to the antenna
jack.
Combiner
UHF300Ohm
VHF300Ohm
VHF/UHF
75Ohm
Combiner
UHF300Ohm
VHF75Ohm
NOTE: If your VHF antenna
has a twin-lead wire use a
300-75 ohm matching
transformer, then Connect
the transformer to the
combiner.