Filter
Top Products
11
Follow the instructions below to connect a VCR to your television using a 75 ohm coaxial cable
(CABLES NOT INCLUDED).
1. Connect the cable, satellite or incoming antenna to the VHF/UHF IN jack on the rear of
the VCR.
2. Connect a 75 ohm coaxial cable from the VCR's 75 ohm OUT jack to theANT jack on the
rear of the TV.
3. Press theAV IN button until regular TV or CATV appears on the TV screen and press
PLAY on the VCR to watch a tape.
Follow the instructions below to connect a VCR to your television using Audio/Video cables
(CABLES NOT INCLUDED).
1. Connect the cable, satellite or incoming antenna to the VHF/UHF IN jack on the rear of
the VCR.
2. Connect the audio cable from the VCR's Audio OUT jack to the TV's Audio IN jack.
Connect the video cable from the VCR's Video OUT jack to the TV's Video IN jack.
3. Press the AV IN button untilAV appears on the TV screen and press PLAY on the VCR to
watch a tape.
NOTE:
Above are basic connection instructions; for detailed connection instructions for external
units, refer to the external unit's owner's manual.
INCOMINGCATV
CABLE
FromVCR OUTjack
VCR
INCOMINGCATV
CABLE
VCR
AUDIOCord
VIDEOCord
FromVCROUTjacks
ToTVINjacks
VCR CONNECTIONS