Filter
Top Products
–
23
–
EN
REPEAT
REPEAT TITLE / CHAPTER
To activate the repeat function, hit [REPEAT]
during playback.
¡The repeat mode changes as described below every
time you hit the button.
DVD-V
REPEAT is available only during playback.
CHAPTER TITLE OFF
(current chapter repeat) (current title repeat)
(repeat
off)
NOTES:
¡Repeat Title/Chapter is not available with some
scenes.
¡The REPEAT setting will be cleared when moving
to other title or chapter.
REPEAT TRACK
To activate the repeat function, hit [REPEAT]
during playback.
¡The repeat mode changes as described below every
time you hit the button.
CD
TRACK ALL OFF
(current track repeat) (entire disc repeat)
(repeat
off)
NOTES:
¡Repeat setting will be cleared when moving to other
track.
¡Repeat playback does not function during repeat A-
B playback.
REPEAT A-B
1 Hit [REPEAT A-B] at your chosen starting
point.
¡“ A-” appears briefly on the TV screen.
2 Hit [REPEAT A-B] again at your chosen end
point.
¡“ A-B” appears briefly on the TV screen, and the
repeat sequence begins.
3 To exit the sequence, hit [REPEAT A-B].
NOTES:
¡The repeat A-B section can only be set within the
current title (for DVDs) or current track (for Audio
CDs).
¡Repeat A-B is not available with some scenes in DVD.
¡To cancel the A point which was set, hit [CLEAR].
¡Repeat A-B playback does not function during title,
chapter, track or all repeat playback.
CD
DVD-V
PROGRAM
You may determine the order in which tracks will play.
1 In stop mode, hit [MODE].
¡The PROGRAM screen will appear.
2 Press [▲ / ▼] to select a track, then hit
[ENTER].
¡Hit [CLEAR] to erase the
most recently entered pro-
gram.
3 Repeat step 2 until you have selected all the
tracks you want to play in the program.
4
Hit [PLAY
OO
] to play the programmed tracks.
NOTES:
¡While the program is being played back, the STOP
works as follows.
¡Hit [STOP C] once and then [PLAY
OO
] again,
playback will restart from the point where STOP
was pressed. (Program continued)
¡Hit [STOP
CC
] twice and then [PLAY
OO
] again,
playback will restart from the track in the usual way.
(Program canceled)
¡Up to 99 programs can be entered.
¡To erase all tracks in the program at once, select
“ALL CLEAR” at the bottom of the list at step 2.
¡If you like to repeat the current track in the program,
hit [REPEAT] repeatedly until “ TRACK”
appears during playback. If you like to repeat the
entire program hit [REPEAT] repeatedly until “
ALL” appears during playback.
CD
RANDOM PLAYBACK
This shuffles the playing order of tracks instead of
playback in the sequence.
1 In stop mode, hit [MODE] twice.
¡RANDOM screen appears.
2 Hit [PLAY
OO
] to start random playback.
NOTE:
¡If you like to repeat the current track in the random
selection, hit [REPEAT] repeatedly until “
TRACK” appears during playback. If you like to
repeat the entire random selection hit [REPEAT]
repeatedly until “ ALL” appears during playback.
CD
PLAY
CD-DA TOTAL 0:45:55
RANDOM PROGRAM
- - no indication - -
RANDOM
SPECIAL PLAYBACK FUNCTION
PLAY
CD-DA TOTAL 0:45:55
RANDOM PROGRAM
- - no indication - -
RANDOM
TOTAL