Emerson EWD2004 DVD VCR Combo User Manual


 
3
EN
Precautions
1. Read Instructions - All the safety and operating instructions
should be read before the appliance is operated.
2. Retain Instructions- The safety and operating instructions
should be retained for future reference.
3. Heed Warnings - All warnings on the appliance and in the
operating instructions should be adhered to.
4. Follow Instructions - All operating and use instructions should
be followed.
5. Cleaning - Unplug this video product from the wall outlet
before cleaning.Do not use liquid cleaners or aerosol clean-
ers. Use a damp cloth for cleaning.
EXCEPTION: A product that is meant for uninterrupted ser-
vice and, that for some specific reason, such as the possibili-
ty of the loss of an authorization code for a CATV converter,
is not intended to be unplugged by the user for cleaning or
any other purpose, may exclude the reference to unplugging
the appliance in the cleaning description otherwise required
in item 5.
6. Attachments - Do not use attachments not recommended by the
video product manufacturer as they may cause hazards.
7.Water and Moisture- Do not use this video product near water,
for example, near a bath tub, wash bowl, kitchen sink, or laundry
tub, in a wet basement, or near a swimming pool, and the like.
8. Accessories - Do not place this video product on an unstable
cart, stand, tripod, bracket, or table.The video product may fall,
causing serious injury to a child or adult, and serious damage
to the appliance.Use only with a cart, stand, tripod, bracket, or
table recommended by the manufacturer, or sold with the
video product. Any mounting of the appliance
should follow the manufacturer's instructions
and should use a mounting accessory rec-
ommended by the manufacturer.
An appliance and cart combination should be
moved with care. Quick stops, excessive
force, and uneven surfaces may cause the
appliance and cart combination to overturn.
MEUBLES - Ne pas installer cet appareil sur un meuble, un socle,
un support, un trépied ou une table instables. L'appareil pourrait
tomber, provoquant des blessures graves à un enfant ou un adulte,
et être sérieusement endommagé. Utiliser uniquement un chariot,
un support, un trépied ou une table recommandés par le fabricant,
ou bien vendus avec l'appareil. Suivre les directives du fabricant
pour le montage de l'appareil et n'utiliser que les accessoires de
montage recommandés par ce dernier. Si on l'installe sur un meu-
ble à roulettes, déplacer les deux ensemble avec précaution. Un
arrêt brusque, l'utilisation d'une force excessive et des surfaces
irrégulières risquent de déstabiliser l'ensemble et de le renverser.
9.Ventilation - Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the video prod-
uct and to protect it from overheating, and these openings
must not be blocked or covered.The openings should never be
blocked by placing the video product on a bed, sofa, rug, or
other similar surface.This video product should not be placed
in a built-in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer's instruc-
tions have been adhered to.
10. Power Sources - This video product should be operated only
from the type of power source indicated on the marking label.
If you are not sure of the type of power supply to your home,
consult your appliance dealer or local power company. For
products intended to operate from battery power, or other
sources, refer to the operating instructions.
11. Grounding or Polarization - This video product is equipped with
a polarized alternating-current line plug (a plug having one
blade wider than the other).This plug will fit into the power out-
let only one way.This is a safety feature. If you are unable to
insert the plug fully into the outlet, try reversing the plug. If the
plug should still fail to fit, contact your electrician to replace
your obsolete outlet. Do not defeat the safety purpose of the
polarized plug.
12. Power Cord Protection - Power supply cords should be routed
so that they are not likely to be walked on or pinched by items
placed upon or against them, paying particular attention to
cords at plugs, convenience receptacles, and the point where
they exit from the appliance.
13. Outdoor Antenna Grounding - If an outside antenna or cable sys-
tem is connected to the video product, be sure the antenna or
cable system is grounded so as to provide some protection
against voltage surges and built-up static charges. Article 810 of
the National Electrical Code, ANSI/NFPA No. 70, provides infor-
mation with regard to proper grounding of the mast and support-
ing structure, grounding of the lead-in wire to an antenna dis-
charge unit, size of grounding conductors, location of antenna-dis-
charge unit, connection to grounding electrodes, and require-
ments for the grounding electrode.(Fig. A)
14. Lightning - For added protection for this video product during a
lightning storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet and discon-
nect the antenna or cable system.This will prevent damage to
the video product due to lightning and power-line surges.
15. Power Lines - An outside antenna system should not be located
in the vicinity of overhead power lines or other electric light or
power circuits, or where it can fall into such power lines or circuits.
When installing an outside antenna system, extreme care should
be taken to keep from touching such power lines or circuits as
contact with them might be fatal.
16. Overloading - Do not overload wall outlets and extension cords
as this can result in a risk of fire or electric shock.
17. Object and Liquid Entry - Never push objects of any kind into
this video product through any openings as they may touch
dangerous voltage points or short-out parts that could result in
a fire or electric shock. Never spill liquid of any kind on the
video product.
18. Servicing - Do not attempt to service this video product your-
self as opening or removing covers may expose you to dan-
gerous voltage or other hazards.Refer all servicing to qualified
service personnel.
19. Damage Requiring Service - Unplug this video product from
the wall outlet and refer servicing to qualified service person-
nel under the following conditions:
a.When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the video
product.
c. If the video product has been exposed to rain or water.
d. If the video product does not operate normally by following the
operating instructions. Adjust only those controls that are cov-
ered by the operating instructions as an improper adjustment
of other controls may result in damage and will often require
extensive work by a qualified technician to restore the video
product to its normal operation.
e. If the video product has been dropped or damaged in any way.
f. When the video product exhibits a distinct change in perfor-
mance this indicates a need for service.
20. Replacement Parts - When replacement parts are required, be
sure the service technician has used replacement parts speci-
fied by the manufacturer or have the same characteristics as the
original part. Unauthorized substitutions may result in fire, elec-
tric shock or other hazards.
21. Safety Check - Upon completion of any service or repairs to
this video product, ask the service technician to perform safe-
ty checks to determine that the video product is in proper oper-
ating condition.
22. Heat - This video product should be situated away from heat
sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
FIGURE A
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
ANTENNA
LEAD
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND
CLAMP
GROUND CLAMP
ELECTRIC
SERVICE
EQUIPMENT
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC – NATIONAL ELECTRICAL CODE
S2898A
Important Safeguards