Filter
Top Products
19
WATCHING TV
EN
STILL MODE
You can freeze the image shown on the screen.
1 Pause the image.
• When you press
[STILL], the image shown on
the screen is paused.
• The audio is not paused and keeps on reading
out.
• If the digital signal is gone or protected, the
image will remain paused and the audio will be
muted.
• The Still function will be released after 5
minutes.
2
Canceling Still function.
• The Still function will be canceled by pressing
any button while Still function is working.
SELECTING AUDIO CHANNELS
This section describes how to switch the audio in
the analog mode and how to switch the audio lan-
guage in the digital mode.
When you press
[AUDIO], the currently selected
audio mode will be displyed on the screen.
Press
[AUDIO] to cycle through available audio
channels.
6
SAP / STEREO
TV
AUDIO
STILL
SETUP
SCREEN
MODE
7 8 9
-
0
AUDIO
NOTE:
• Press any key except [POWER] to cancel still mode.
Still
AUDIO
STILL
SETUP
SCREEN
MODE
1 2 3
4 5 6
7 8 9
-
0
STILL
When the broadcasting has all audio...
When the broadcasting has stereo audio and
monaural audio...
When the broadcasting has SAP and monaural
audio...
When the broadcasting is having only monaural
audio...
(cannot be switched.)
STEREO : Outputs stereo-audio
SAP : Outputs second audio program
MONO : Outputs mono-audio
When you press
[AUDIO], the currently selected
language and the number of available languages
will be displayed on the screen.
Press
[AUDIO] to cycle through available audio
languages.
• Available languages differ depending on the
broadcast.
• The information display will automatically dis-
appear in one minute.
NOTE:
• Pressing [AUDIO] does not control external audio source.
English 1/3 Spanish 2/3
Other 3/3
6-1
English 1/3
DTV
MONO
SAP / MONO SAP / MONO
MONO / STEREO MONO / STEREO
SAP / STEREO SAP / STEREO
SAP / MONO