Emotiva LPA-1 Home Theater Screen User Manual


 
Page 24
Page 24
LPA-1 Technical Speci cations
Rated Power Output:
(All Channels Driven @ 1Khz, 120VAC/ 60HZ supply, THD noted)
Channels 1-5
125
Watts into 8 Ohms (0.04%THD)
225
Watts into 4 Ohms (0.04%THD)
Channels 6-7
50
Watts into 8 Ohms (0.05%THD)
95
Watts into 4 Ohms (0.05%THD)
Frequency Response:
20-20Khz:
+/-0.1dB
10-100Khz:
+/-1.0dB
Total Harmonic Distortion (THD): (80kHz measurement bandwidth)
Channels 1-5: <0.040%
Channels 6-7: <0.052%
Signal-to-Noise Ratio: >100dB, Unweighted (Full Output Reference)
DC Offset: <1mV
Crosstalk: >75dB
Damping Factor: Approximately 200 into 8 Ohms
Input Sensitivity Range (Gain):
Channels 1-5 29dB
Channels 6-7 26dB
Input Impedance (RCA Input)
47K Ohm
External Trigger Input: 3-12 VDC, center tip of 3.5mm jack is positive
Clearance for ventilation (Back): Minimum 2” / 50 mm
Electrical Power Requirement:
1200 watts @ 115VAC when driven into 8 Ohms
Electrical Power Consumption:
4 Watts (Standby) and 46 Watts (Idle)
Raw Weight:
63lbs / 28.63kg
Shipping Weight:
70bs / 31.81kg
Dimensions:
17” W x 7.75” H x 19” D
432mm W x 197mm H x 483mm D