Filter
Top Products
ENUTV-DVB-S User’s Guide -
14
3.1.4 Delete Satellite
Delete a satellite in the transponder list. First select the satellite and press the Del button to delete
it.
3.1.5 DiSEqC Setting
DiSEqC1.2 is a special protocol for dish motor which drives the dish to aim the satellite.
a) [East/West]
Drive the motor turn to East or West direction until unclench it or reach the limit.
b) [Software Limits]
Set the east or west limit to ensure the motor will not reach the real limit. If not set a limit, the
motor will continue to drive the dish to East or West although it can not turn east or west too
much, the load of motor will be so large that it possibly will be damaged.
c) [Position]
Input the satellite position.
d) [Angle]
Degree: Enter the degree of the satellite position on the sky.
e) [Reset]
Click the [Reset] button to drive the dish to zero position.
f) [Stop]
Click the [Stop] button to stop the motor.
g) [Close]
Click the [Close] button to exit the window.