Filter
Top Products
ENUTV-DVB-S User’s Guide -
16
3.3 Transponder Parameters
1. Add transponder
Add a new transponder in the transponder list. The following figure is transponder parameter
dialog box.
a) Name:
Enter the new name of the TP.
b) [Frequency (MHz)]
This box indicates the down link frequency of the current transponder.
c) [Symbol Rate (KS/s)]
This box indicates the symbol rate of the current transponder.
d) [Polarity]
This box shows the LNB power supply mode. There are [Vertical], [Horizontal] polarization and
[Disable] for your choice.