Filter
Top Products
Selecting a Channel
Follow these steps to select a channel from the Electronic Program Guide (EPG):
1 Make sure you are tuned to a digital (High Definition) channel; your tuner does not support the EPG for
non-digital channels.
Note
If you see a message that the EPG is not supported, press the up or down arrow button on your tuner’s remote control to switch to
a digital channel.
2 Press the EPG button on the tuner’s remote control twice. You see the Channel Guide.
3 Use the up and down arrow buttons on the tuner’s remote control to scroll through the guide. Highlight the
Physical Channel that is on the same row as the Virtual Channel you want.
4 Press the Enter button. The image for the first Virtual Channel in the row appears in the preview box in the
upper right corner. (In the screen above, the image from KCET-HD 28-01 is displayed.)
5 Press the Exit button on the remote control twice. The screen displays the previewed image.
6 To select another Virtual Channel in the same row, press the up arrow button on the tuner’s remote control
until you see the image for the channel you want. To move back to a previous channel in the row, press the
down arrow button.
Note
You can also use the numeric keypad on the tuner or television remote control to select a channel. For instructions on using the
tuner’s remote control to select a channel, see “Selecting Digital Channels” in your tuner’s User’s Guide.
CPD-18867R1
Printed in USA
®
HDTV LCD Projection Television